The GT-9, GT-7, and GT-4 features a slidable rail system, allowing for flexible positioning to find optimal setup. The GT-7 and GT-4 will fit virtually any pistol or firearm with a universal rail. The GT-9 is designed to fit standard and XL firearms with a universal rail.

All GunTag products are designed to fit both an Apple AirTag and the latest model Tile Sticker.

An Apple AirTag has an estimated battery life of 1 year and are easily replaceable. They take a CR2032 lithium 3v coin battery available at most electronic and drug stores. Here is a link to show you how to replace the battery in an AirTag. Tile Stickers have a battery life of up to 3 years, however the battery is not replaceable.

If your firearm with attached GunTag is ever stolen, contact your local law enforcement immediately. Visit our Lost or Stolen page to learn how to share your GunTag’s inserted Apple AirTag or Tile Sticker location with authorities. Never under any circumstance attempt to recover the gun yourselves. Remember these criminals have your firearm and potentially others. Self recovery is extremely dangerous and likely to cause injury or death.

It is very important to Register your GunTag. GunTag tamper proof screws and keys are unique to our product and cannot be found in your local hardware store. If you do lose your security tool or tamper proof screw, visit our Contact Us page and send us a message so we may contact you.

Currently GunTag only sells through distributors. Visit our Where to Buy Page to find an online store or physical store near you.

The GT-9 and GT-7 have an estimated continuous run time of 45 minutes.

Step 1: Prior to heading to the range, you can rough sight your laser in. Mount the device on your firearm. Turn the laser on, look down your iron sights of the gun and hold it steady at a target 21-30 feet away. Find the windage and elevation adjustment screws and using the supplied adjustment wrench, turn the adjustment screws until the laser is positioned in front of the sight on the firearm.


Step 2: Head to the range and set up a target at the same distance you rough sighted the laser in. Load 3 rounds and aim the laser at the center of your target. Fire 3 rounds. Make your gun safe.


Step 3: Make small adjustments to the laser so the point of impact moves towards the center of your target. Repeat step 2 and 3 until you can confirm zero is set. 


Note: You may find that your laser is sighted in after your rough zero it. If you remove your device from the firearm it is mounted to, you will need to reconfirm zero when it is mounted again.

There are a wide variety of holsters on the market. We advise that your visit the GT-9, GT-7, and GT-4 page to review the dimensions of each product before purchasing a holster.

Yes! Every GunTag product has a Limited Lifetime Warranty. Please visit our Warranty page for more information. If you feel your product is defective, please fill out the contact us form below so we may contact you.